WPL6 pipe cap

WPL6 pipe cap, also known as head, plug, head, pipe cap and bulkhead, is a pipe fitting welded on the pipe end or installed on the external thread of the pipe end to cover the pipe. It is used to close the pipeline and has the same function as the pipe plug

WPL6 pipe cap includes the design of convex pipe cap, conical shell, reducing section, flat cap and tight mouth

WPL6 pipe cap is only the head of the pipe. If DN exceeds 300, the head shall be used instead. If it is under pressure, strength check shall be carried out. The shape of the pipe cap is similar to that of the head. The stainless steel head is widely used, and the size of the pipe cap is relatively small, which can be forged; The size of the head is relatively large, which is generally pressed with steel plates. The pipe cap is generally used at the end of the pipe. The head is used at the upper and lower (vertical equipment) parts of the container equipment or at the left and right ends (horizontal equipment)

Stainless steel: 304 304L 316 316L 321 2520 310, 317, etc

Diameter: DN15-DN1200

Wall thickness: SCH5-SCH160

Standard: ASME DIN JIS BS GB/T JB SH HG, as follows: GB/T12459-2017, GB/T13401-2017, ASME B16.9, SH3408,

SH3409, HG/T21635, DL/T695, SY/T0510, DIN2617 Carton